Advantest R3766EH
RF Network Analyzer
Description
This Analyzer is an instrument which measures the complex transmission and reflection characteristics of two port devices in the frequency domain.
It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two port.
Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
This unit utilize synthesized frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels.
This unit also can perform ratioed measurements (including phase), which require multiple receivers.
This unit can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group delay response.
Key Points
Built in S parameter
2 Measurement channels
High speed signal processing
High speed Sweep of 0.15ms/pt
Direct memory access
Progressive sweep function
Pass/Fail test
Limit lines
Built in BASIC cntroller
Dynamic Range of 100dB
Output Accuracy of 0.5dB
Specifications
Source Frequency range: 40MHz to 8GHz
Source Frequency Resolution: 1Hz
Source Frequency Accuracy: 0.002%
Maximum Output Power: 10mW
Power Resolution: 0.01dB
Output Accuracy: 0.5dB
Output Impedance: 50Ohms
Number of Receiver Channels: 1Ch
Receiver Frequency: 40MHz to 8GHz
Maximum Dynamic Range: 100dB
