Advantest R3766
RF Network Analyzer
Description
This Analyzer is an instrument which measures the complex transmission and reflection characteristics of two port devices in the frequency domain.
It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two port.
Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
This unit utilize synthesized frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels.
This unit also can perform ratioed measurements (including phase), which require multiple receivers.
This unit can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group delay response.
Key Points
Built in Power splitter
2 test inputs channels
High speed signal processing
Sweep mode of 0.15ms/tstpt
Electronic Attenuator
Progressive sweep function
Alphanumeric flrsct Display
Limit lines
Built in BASIC controller
Specifications
Form Factor: Benchtop
Source Frequency: 40MHz to 8.0GHz
Source Frequency Resolution: 1Hz
Maximum Output Power: 50.1187mW
Power Resolution: 0.01dB
Output Accuracy: 0.5dB
Output Impedance: 50Ohms
Number of Receiver Channels: 2Ch
Receiver Frequency: 40MHz to 8.0GHz
Maximum Dynamic Range: 100dB
Displayed Average Noise: -100dBm to -90dBc