Advantest R3753BH
RF Network Analyzer
Description
This Analyzer is an instrument which measures the complex transmission and reflection characteristics of two port devices in the frequency domain.
It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two port.
Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
This network analyzers utilize synthesized frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels.
It also can perform rationed measurements (including phase), which require multiple receivers.
They can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group delay response.
Key Points
7.8 inch TFT clr LCD
Swp Time from 0.1ms/pt
Wide Dynamic Range from 115dB
Hi Speed Lvl Swp Func
Expd BASIC prog mem (1MB)
Expd save reg cap (2MB)
Impr BASIC proc speed
Limit line function
Hi Spd Lvl Var Meas
Output Accuracy from 0.5dB
Specifications
Minimum Frequency: 5Hz
Maximum Frequency: 500MHz
Frequency Resolution: 0.1Hz
Frequency Accuracy: 0.002%
Minimum Output Power: 5.0118E10Watts
Maximum Output Power: 125.893mW
Power Resolution: 0.1dB
Output Accuracy: 0.5dB
Output Impedance: 50ohms
Number of Receiver Channels: 2ch