Advantest R3752CH
RF Network Analyzer
Description
This Analyzer is an instrument which measures the complex transmission and reflection characteristics of two port devices in the frequency domain.
It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two port.
Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
This unit utilize synthesized frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels.
This unit also can perform ratioed measurements (including phase), which require multiple receivers.
This unit can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group delay response.
Key Points
Green Florescent screen
Sweep Time of 0.1ms/pt
Wide Dynamic Range of 115dB
High Speed Lvl Sweep Function
Expand BASIC prog mem (1MB)
Expand save reg cap (2MB)
Improved BASIC processing speed
Limit line function
High Speed GO/NO-GO dec function
Output Accuracy of 0.5dB
Specifications
Form Factor: Benchtop
Type: Vector
Source Frequency: 5Hz to 500MHz
Source Frequency Resolution: 0.1Hz
Source Frequency Accuracy: 0.002%
Power Resolution: 0.1dB
Output Accuracy: 0.5dB
Output Impedance: 50Ohms
Number of Receiver Channels: 2Ch
Receiver Frequency: 5Hz to 500MHz
Maximum Dynamic Range: 115dB
