Advantest R3267

The R3267 Series spectrum analyzers are high performance and multi-featured analyzers (with basic functions) that respond to customer demands for the Future Public Land Mobile Telecommunication System and have a high ratio of C/N.

The Advantest R3267 Spectrum Analyzer features a frequency span accuracy within ± 1% and a dynamic range of -154dBc/Hz (typ.) in the 2GHz band to allow accurate, repeatable measurements for high-quality digital signals.

Further, its 10Hz to 10MHz resolution band with filter and ability to perform a 70dB (typ, at 5MHz offset) ACP measurement on W-CDMA makes it ideal for testing of wide band signals.

Finally, with a frequency range from 100Hz to 8GHz, the R3267 allow comprehensive measurements of even high frequency systems.

The front panel of the R3267 consists of Display section, power switch/connector section, Floppy disk drive section, Measurement section, Marker section, Save/Recall section, DISPLAY CONTROL section, ENTRY section, REMOTE section, Control section and Option section.

Remove dust from the outside of the R3267 by wiping or brushing the surface with a soft cloth or small brush. Use a brush to remote dust from around the panel keys. Hardened dirt can be removed by using a cloth which has been dampened in water containing a mild detergent.

Normally cleaning the display filter from the front should be sufficient. However, if the inside of the filter or the LCD surface is dirty, you can detach the screen filter from the R3267 series by removing the two screws on the front and pulling the right-hand part of the filter forward. Clean the filter with a piece of soft close.