Advantest Q7760
Optical Network Analyzer
Description
The Advantest Q7760 Optical Network Analyzer is an analyzer used to analyze the magnitude, group delay time, dispersion characteristics, dispersion slope characteristics and dispersion characteristics in the polarization mode of transmitted and reflected light from optical devices at high speed and with high resolution by adopting the phase shift method for chromatic dispersion measurement.
Although the Q7760 has been designed to withstand a certain amount of noise riding on the AC power line, it should be used in an area of low noise. A noise cut filter can be used to avoid ambient noise.
During operation, the power supply automatically switches between input voltage labels of 100 VAC and 200 VAC.
The remote control capabilities allow the user to setup an automatic measurement system. This remote control function can be controlled through the GPIB bus.
Key Points
High speed measurement
Wide dynamic range
Extensive group delay measurement range
Measurement accuracy
Save and load functions.
3.5-inch floppy disk drive.
Support for ESC/P, ESC/P R and PCL compatible printers.
Remote control capabilities.
Specifications
Dynamic Range: 35dBm
Optical Connector: FC
Polarization Dependency: +/- .1dB
Power Level: >= -15dBm
Return loss: 33dB
Sweep : .1nm to 110nm
Wavelength Range: .1nm to 110nm
Power: AC 100 to 120 V, AC 220 to 240 V, 50/60 Hz , 300 VA or less
Operating temperature: 15 to 35°C, Relative humidity - 85% or less
Storage temperature: -10 to 45°C, Relative humidity - 90% or less
Dimensions: Display unit - approx. 424 (W) x 220 (H) x 400 (D) mm, Optical network analyzer unit - approx. 424 (W) x 220 (H) x 500 (D) mm
Mass: Display unit; 17 kg or less, Optical network analyzer unit; 28 kg or less
